Hi I just got my self a Pinphone 3gs but it seems the firmware is an old one. I835S_EU_CA_W_V1_0_3 Ive heard the newer firmware is much better so id like to update it. Ive downloaded: Firmware V1.1.3 Flashtool v3.0952 and the MTK62xx comport-drivers Ive linked the phone up using the standard usb to serial cord you get with the phone. Can I use this??? Or do I need to buy a different type??? When using the flashtool I try open the download agent MTK_AlllnOne_DA.bin And the scatter loader: scat_MT6235_oxa.txt The operation method is set to NFB And the baudrate set to 115200 bps however when I click download I get the following message preventing me from updating. ============================================= FLASHTOOL ERROR: S_BROM_FAIL_TO_GET_BBCHIP_HW_VER (2022) [H/W] fail to get target baseband chip H/W version! possible reasons: 1. Theres an UART communication between FlashTool and BootROM. 2. Target might be shutdown unexpetedly. [ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side UART path. 3. Monitor if power -drop occured in target side. ============================================ Can someone please tell me where Im going wrong or point me in the direction of a step by step tutorial. Ive searched all over the internet but the only luck Ive had is this forum. Any help would be great thanks.